Producción Científica Profesorado

Removal and confinement of Hg(II) by polyurethane foam functionalized with potassium O-ethyldithiocarbonate



Páez Hernández, María Elena

2019

Flores-Aguilar, J.F., Galán-Vidal, C.A., Rodríguez, J.A, Alvarado-Rodriguez, J.G, Paez-Hernandez, M.E.Removal and confinement of Hg(II) by polyurethane foam functionalized with potassium O-ethyldithiocarbonate.l. Int. J. Environ. Sci. Technol. (2019), 16, 1005-1014. https://doi.org/10.1007/s13762-018-1723-x


Abstract


Polyurethane foam functionalized with potassium O-ethyldithiocarbonate was evaluated as an extractant material for Hg(II). Several parameters such as pH, mass amount and extraction time were studied. Under the best conditions, a 86% of mercury extraction was achieved. Dubinin?Radushkevich isotherm model indicated that the nature of interaction between functionalized foam and Hg(II) is chemical. Regarding interferents, metallic ions Ag(I) and Sn(IV) have a significant influence on the Hg extraction percentage. In the case of silver, it had a synergistic effect increasing the percentage of mercury due to a metallophilic interaction. Also, once the mercury was extracted, its leaching from the functionalized polyurethane foam was evaluated by means of two sequential extraction procedures. In this way, the functionalized foam emerges as a good material for the removal and confinement of chemical species. Obtained results show that mercury extraction is successful even from complex solution and that mercury-foam material is stable under extreme chemical and temperature conditions.



Producto de Investigación




Artículos relacionados

Kinetics of Polypyrrole Films Doped with Sulphate Ions Electrodeposited Over Graphite - Epoxy Resin ...

Sequential Injection Spectrophotometric Determination of Diclofenac in Urine and Pharmaceutical Form...

Magnetic solid phase extraction based on phenyl silica adsorbent for the determination of tetracycli...

Development of a Chloride Ion-Selective Solid State Sensor Based on Doped Polypyrrole-Graphite-Epoxy...

Synthesis, characterization, and crystal structures of n-alkyldiorganodithiophosphates RS2P(OC6H4)2

Metal content evaluation and its effect on the stability of anthocyanins

Electrochemical and AFM characterization of the electropolimerization of pyrrole over a graphiteepox...

Determination of glucose by flow injection analysis with amperometric detection at Fe(III)-(tris(3,5...

Estudio de las Interacciones Ácido Húmico-Metales Pesados y Determinación de sus Constantes de Estab...

Development of a novel nitrate-selective composite sensor based on doped polypyrrole