Producción Científica Profesorado

Evaluation of the use of solvent impregnated resins in the analysis of salbutamol in human urine followed by capillary electrophoresis.



Galan Vidal, Carlos Andres

2016

Irma Pérez-Silva, Ma. Teresa Ramírez-Silva, Carlos A. Galán-Vidal, Giaan A. Álvarez-Romero, José A. Rodríguez, Ma. Elena Páez-Hernández. Evaluation of the use of solvent impregnated resins in the analysis of salbutamol in human urine followed by capillary electrophoresis.Reactive and Functional Polymers, 2016, 105, 89-94


Abstract


In this work, a method for sorption and concentration of salbutamol in urine combined to capillary electrophoresis with UV detection was performed. The procedure is based on the sorption of salbutamol on solvent-impregnated resins that is prepared by an impregnation technique using Aliquat 336 as extractant and XAD-4 resin as the base polymer. Batch studies showed an efficient sorption/desorption results when the salbutamol solution contains NaOH 0.05 mol L? 1 and the eluent is 0.5 mol L? 1 NaCl. Linearity was obtained in the range of 1000?10,000 ng mL? 1 of salbutamol. The limit of quantification was 999 ng mL? 1. The solvent-impregnated resin was used for 10 cycles without a significant loss of the salbutamol quantification capacity. The method was applied to analyze salbutamol in urine samples at levels useful for international health organizations. Although most reports of solvent impregnated resins are related to the extraction of metal ions and only a few organic compounds, the proposed methodology demonstrate that solvent impregnated resins allows the isolation and concentration of salbutamol from complex samples such as urine. Since no SB is recovered using resin without Aliquat 336, this work shows an advantage of SIR over simple adsorption processes.



Producto de Investigación




Artículos relacionados

Characterization of Main Anthocyanins Extracted from Pericarp Blue Corn by MALDI-ToF MS

Morphological and magnetic properties of cobalt nanoclusters electrodeposited onto HOPG

Effect of TiO2-Al2O3 sol-gel supports on the superficial Ni and Mo species in oxidized and sulfided ...

Revisión de variables de diseño y condiciones de operación en la electrocoagulación

Bioacumulación y daños genotóxicos en Pez Cebra (Danio rerio) por arsénico en aguas de Zimapán, Hida...

Zinc Electrodeposition from Chloride Solutions onto Glassy Carbon Electrode

Cobalt electrodeposition on polycrystalline palladium. Influence of temperature on kinetic parameter...

Kinetic study of the cobalt electrodeposition onto glassy carbon electrode from ammonium sulfate sol...

THEORETICAL STUDY ON THE MODIFICATION OF ACTIVE SITES IN GOLD SURFACES MODELED AS FINITE CLUSTERS: I...

Potentiometric behavior of graphite-epoxy electrochemical transducers towards anions, cations and pH...