Producción Científica Profesorado

Mechanosynthesis, crystal structure and magnetic characterization of M-type SrFe12O19



Sánchez De Jesús, Félix

2013

F. Sánchez-De Jesús, A. M. Bolarín-Miró, C.A. Cortés-Escobedo, R. Valenzuela, S. Ammar, Mechanosynthesis, Crystal Structure and Magnetic Characterization of M-type SrFe12O19. Ceramics International (In press-2013). ISSN: 0272-8842.


Abstract


M-type strontium hexaferrite was prepared by mechanosynthesis using high-energy ball milling. The influence of milling parameters, hematite excess and annealing temperature on magnetic properties of SrFe12O19 were investigated. Commercial iron and strontium oxides were used as starting materials. It was found that mechanical milling followed by an annealing treatment at low temperature (700 C) promotes the complete structural transformation to Sr-hexaferrite phase. For samples annealed at temperatures from 700 to 1000 C, saturation magnetization values (Ms) are more sensitive to annealing temperature than coercivity values (Hc). The maximum Ms of 60 emu/g and Hc of 5.2 kOe were obtained in mixtures of powders milled for 5 h and subsequently annealed at 700 C. An increase in the annealing temperature produces negligible changes in magnetic saturation and coercivity. An excess of hematite as a second phase produces a slight decrease in the saturation magnetization but leads to a significant increase in coercive field, reaching 6.6 kOe.



Producto de Investigación




Artículos relacionados

CARACTERIZACIÓN DE FERRITA DE MANGANESO OBTENIDA POR MECANOSÍNTESIS.

SÍNTESIS DE NiMn2O4 ASISTIDA MEDIANTE MOLIENDA DE ALTA ENERGÍA A PARTIR DE MEZCLAS DE NiO-MnO

EFECTO DE LA MOLIENDA MECANICA Y LOS TRATAMIENTOS TÉRMICOS EN LA OBTENCIÒN DE COMPUESTOS DE NiO Y Mn...

REDUCCIÓN QUÍMICA DE NiO-8YSZ PARA LA OBTENCIÓN DE CERMETS Ni-8YSZ ÚTILES COMO ÁNODOS EN CELDAS DE C...

EFECTO DEL POLIETILENGLICOL (PEG) Y LA POLIETILENIMINA (PEI) PARA LA SUSPENSION DE PARTICULAS DE NiO...

Estabilidad térmica de manganitas tipo La1-xCaxMnO3 obtenidas mediante mecanosíntesis

Amorphization of Co-base alloy by mechanical alloying

Mechanosynthesis and magnetic characterization of nanocrystalline manganese ferrites

EFECTO DE LA MOLIENDA MECANICA Y LOS TRATAMIENTOS TÉRMICOS EN LA OBTENCIÒN DE COMPUESTOS DE NiO Y Mn...

SÍNTESIS Y CARACTERIZACIÓN DE CÁTODOS DE CaxLa1-xMnO3 PARA SU APLICACIÓN EN CCOS