Producción Científica Profesorado

Crystal structure and mixed ionic-electronic conductivity of mechanosynthesized La1-xCaxMnO3 (0

Sánchez De Jesús, Félix

2012

F. Sánchez-De Jesús, C.A. Cortés-Escobedo, A.M. Bolarín-Miró, I. A. Lira-Hernández, G. Torres-Villaseñor, (2012). Crystal structure and mixed ionic-electronic conductivity of mechanosynthesized La1-xCaxMnO3 (0

Abstract


The aim of this work was to study the relationship between the crystalline structure, the mixed ionic-electronic conductivity and the calcium content in calcium-doped lanthanum manganites (CLM, La1-xCaxMnO3) synthesized by reactive ball milling. Mechanosynthesis was employed to produce nanocrystalline CLM with varying calcium content (x = 0 - 0.8 in increments of 0.1). Powders of Mn2O3, La2O3 and CaO mixed in the stoichiometric ratio were used as raw materials. The mechanosynthesis was carried out using a high-energy shaker mixer/mill. X-ray powder diffraction and Rietveld refinement were used to determine the crystalline structure as a function of calcium content. The four-point probe resistivity test was used to measure the electrical resistivity of the compacted and sintered powders using a DC milli-ohm meter. The results showed that the substitution of the La3+ ion by the Ca2+ ion during mechanosynthesis only changed the lattice parameters but not the orthorhombic Pnma structure. The mixed ionic-electronic conductivity increased with the Ca2+ content. The best conductivity was observed for the composition of La0.2Ca0.8MnO3



Producto de Investigación




Artículos relacionados

REDUCCIÓN QUÍMICA DE NiO-8YSZ PARA LA OBTENCIÓN DE CERMETS Ni-8YSZ ÚTILES COMO ÁNODOS EN CELDAS DE C...

Amorphization of Co-base alloy by mechanical alloying

OBTENCION DE Co-27Cr-6Mo MEDIANTE ALEADO MECANICO PARA POSIBLES APLICACIONES BIOMÉDICAS

ESTUDIO COMPARATIVO DEL USO DE ÁCIDO CÍTRICO Y UREA EN LA SÍNTESIS DE MANGANITAS DE CALCIO DOPADAS C...

OBTENCION DE Co-27Cr-6Mo MEDIANTE ALEADO MECANICO PARAPOSIBLES APLICACIONES BIOMÉDICAS

MECANOSÍNTESIS DE MANGANITAS DE LANTANO: EFECTO DE LA RELACIÓN EN PESO BOLAS:POLVO

EFECTO DEL POLIETILENGLICOL (PEG) Y LA POLIETILENIMINA (PEI) PARA LA SUSPENSION DE PARTICULAS DE NiO...

REDUCCIÓN QUÍMICA DE NiO-8YSZ PARA LA OBTENCIÓN DE CERMETS Ni-8YSZ ÚTILES COMO ÁNODOS EN CELDAS DE C...

EFECTO DEL POLIETILENGLICOL (PEG) Y LA POLIETILENIMINA (PEI) PARA LA SUSPENSION DE PARTICULAS DE NiO...

MECANOSÍNTESIS DE MANGANITAS DE LANTANO: EFECTO DE LA RELACIÓN EN PESO BOLAS:POLVO