Producción Científica Profesorado

Determination of strontium and lanthanum zirconates in YPSZLSM mixtures for SOFC



Sánchez De Jesús, Félix

2008

Claudia Alicia Cortes Escobedo, Juan Muñoz-Saldaña, Ana M Bolarín Miró, Felix Sanchez de Jesús, Determination of strontium and lanthanum zirconates in YPSZLSM mixtures for SOFC, Journal of Power Sources, Elsevier, 180 (1),pp. 209-214 (2008) ISSN: 0378-7753 doi: :10.1016/j.jpowsour.2008.01.067, Elsevier B.V.


Abstract


Mixtures of 3% yttria- and partially-stabilized zirconia with LSMx (strontium-doped lanthanum manganite, x = 0, 0.15 and 0.2) were prepared and heat treated at temperatures between 1000 and 1300 C to recreate the cathodeelectrolyte interface interactions taking place during preparation and operation of solid oxide fuel cells (SOFC). Such interactions include the formation of La2Zr2O7 and SrZrO3, which are undesirable for SOFC. The effect of the manganese oxidation number on the mechanosynthesis of LSM during zirconate formation is also discussed. A quantitative analysis of zirconate formation by X-ray diffraction and Rietveld refinement was undertaken. Formation of lanthanum and strontium zirconates was completely avoided at temperatures as high as 1300 C by synthesizing lanthanum manganites from MnO2 doped with 15 at.% of Sr. Finally, in the presence of LSM, monoclinic phase content was diminished to less than 1.5 mol% after heat treatment at 1300 C.






Artículos relacionados

Amorphization of Co-base alloy by mechanical alloying

OBTENCION DE Co-27Cr-6Mo MEDIANTE ALEADO MECANICO PARA POSIBLES APLICACIONES BIOMÉDICAS

Estabilidad térmica de manganitas tipo La1-xCaxMnO3 obtenidas mediante mecanosíntesis

CARACTERIZACIÓN DE FERRITA DE MANGANESO OBTENIDA POR MECANOSÍNTESIS

SÍNTESIS DE NiMn2O4 ASISTIDA MEDIANTE MOLIENDA DE ALTA ENERGÍA A PARTIR DE MEZCLAS DE NiO-MnO

ESTUDIO COMPARATIVO DEL USO DE ÁCIDO CÍTRICO Y UREA EN LA SÍNTESIS DE MANGANITAS DE CALCIO DOPADAS C...

MECANOSÍNTESIS DE MANGANITAS DE LANTANO: EFECTO DE LA RELACIÓN EN PESO BOLAS:POLVO

OBTENCION DE Co-27Cr-6Mo MEDIANTE ALEADO MECANICO PARAPOSIBLES APLICACIONES BIOMÉDICAS

EFECTO DEL POLIETILENGLICOL (PEG) Y LA POLIETILENIMINA (PEI) PARA LA SUSPENSION DE PARTICULAS DE NiO...

EFECTO DE LA MOLIENDA MECANICA Y LOS TRATAMIENTOS TÉRMICOS EN LA OBTENCIÒN DE COMPUESTOS DE NiO Y Mn...